SAE J 10-2000 对汽车和越野车用气压制动储气筒性能及标识要求
SAE J 100-1999 旅客车箱玻璃窗的遮光条
SAE J 1001-1987 工业甩刀式割草机及动力耙
SAE J 1004-1999 发动机冷却系统的名词汇编
SAE J 1008-1987 自行式农用设备的外部声测量
SAE J 101-1989 汽车鼓式剎车液压分泵缸
SAE J 1012-1993 农用设备外壳压紧系统试验程序
SAE J 1013-1992 越野工作机械坐着的驾驶员全身振动的测量
SAE J 1014-1995 集材拖拉机和履带拖拉机牵引绞车的分类和命名
SAE J 1015-1995 每小时10公里测试程序
SAE J 1017-1986 压路机压实机零件的命名
SAE J 1019-1990 用于高温传动装置输油软管、发动机润滑油软管及软管组件的测试程序
SAE J 1024-1989 施工和工业机械空气加热的燃料加热器
SAE J 1025-2000 TEST PROCEDURES FOR MEASURING TRUCK TIRE REVOLUTIONS PER KILOMETERMILE
SAE J 1028-1998 移动式起重机工作区定义
SAE J 1029-1996 施工和工业机械的照明和标志
SAE J 1032-1987 越野工作机械的机器利用率的定义
SAE J 1033-1993 飞轮、飞轮罩及飞轮罩附件的镗孔偏心度及表面偏差的测量程序
SAE J 1037-2001 风挡冲洗管
SAE J 1038-1992 对儿童雪地汽车的建议标准
SAE J 1042-2002 通用工业机械的驾驶员保护
SAE J 1044-1981 WORLD MANUFACTURER IDENTIFIER
SAE J 1050-2003 (R) DESCRIBING AND MEASURING THE DRIVER'S FIELD OF VIEW
SAE J 1051-2002 越野工作机械用软座垫的挠度
SAE J 1052-2002 机动车辆驾驶员和乘客的头部位置
SAE J 1053-1996 STEEL STAMPED NUTS OF ONE PITCH THREAD DESIGN - INCH SERIES
SAE J 1053M-1996 STEEL STAMPED NUTS OF ONE PITCH THREAD DESIGN - METRIC SERIES
SAE J 1058-1999 薄钢板的厚度和外形
SAE J 1059-1984 速度计的测试程序
SAE J 1060-2000 SUBJECTIVE RATING SCALE FOR EVALUATION OF NOISE AND RIDE COMFORT CHARACTERISTICS RELATED TO MOTOR VEHICLE TIRES
SAE J 1061-1998 普通螺栓,螺钉和双头螺栓的表面不均匀性
SAE J 1062-1995 雪地汽车的乘客把手
SAE J 1063-1993 悬臂起重机结构的测试方法
SAE J 1065-2003 (R) NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING
SAE J 1067-1998 SEVEN CONDUCTOR JACKETED CABLE FOR TRUCK TRAILER
SAE J 1069-1981 越野自行式工作机械的快速换油装置
SAE J 107-1996 OPERATOR CONTROLS AND DISPLAYS ON MOTORCYCLES
SAE J 1071-2003 平地机的驾驶员操纵
SAE J 1072-1977 SINTERED TOOL MATERIALS
SAE J 1073-1995 装有弹簧的离合器的旋转测试程序
SAE J 1074-2000 发动机声级测量程序
SAE J 1075-2000 施工现场的声测量
SAE J 1076-1990 BACKUP LAMP SWITCH
SAE J 1078-1994 A RECOMMENDED METHOD OF ANALYTICALLY DETERMINING THE COMPETENCE OFHYDRAULIC TELESCOPIC CANTILEVERED CRANE BOOMS
SAE J 1079-1995 偏心离合器的旋转测试程序
SAE J 108-2000 摩托车制动系统的道路测试规范
SAE J 1081-2000 SAE试验用钢的化学成分
SAE J 1083-2002 未经批准的机械的起动或运转
SAE J 1084-2002 用于某些林业设备的驾驶员保护性结构的性能标准
SAE J 1085-1999 TEST FOR DYNAMIC PROPERTIES OF ELASTOMERIC ISOLATORS
SAE J 1086-1995 金属和合金编号
SAE J 1087-2000 单向离合器的命名和术语
SAE J 1088-1993 测量多用途小功率发动机排放物的测试程序
SAE J 109-2000 摩托车和机动自行车的制动系统的性能要求
SAE J 1091-2003 EARTHMOVING MACHINERY - OPERATOR'S FIELD OF VIEW
SAE J 1093-1994 LATTICED CRANE BOOM SYSTEMS - ANALYTICAL PROCEDURE
SAE J 1094-1992 CONSTANT VOLUME SAMPLER SYSTEM FOR EXHAUST EMISSIONS MEASUREMENT
SAE J 1095-2003 辐轮和轮毂疲劳测试程序
SAE J 1096-2000 静态条件下重型卡车外部声级的测量
SAE J 1098-1995 每小时10公里的操作
SAE J 1099-2002 TECHNICAL REPORT ON LOW CYCLE FATIGUE PROPERTIES FERROUS AND NON-FERROUS MATERIALS
SAE J 1100-2002 机动车辆的尺寸
SAE J 1101-2002 摩托车停车稳定性测试程序
SAE J 1102-1995 MECHANICAL AND MATERIAL REQUIREMENTS FOR METRIC WHEEL BOLTS
SAE J 1102M-2001 MECHANICAL AND MATERIAL REQUIREMENTS FOR METRIC WHEEL BOLTS
SAE J 1105-1989 施工机械前置警告电喇叭的性能测试和操作
SAE J 1106-1975 LABORATORY TESTING MACHINES AND PROCEDURES FOR MEASUREING THE STEADY STAT FORCE AND MOMENT PROPERTIES OF PASSENGER CAR TIRES
SAE J 1107-1975 LABORATORY TESTING MACHINES AND PROCEDURES FRO MEASURING THE STEADY STATE FORCE AND MOMENT PROPERTIES OF PASSENGER CAR TIRES
SAE J 1108-2002 TRUCK AND TRUCK TRACTOR VEHICLE IDENTIFICATION NUMBER SYSTEMS
SAE J 1109-2002 橡胶轮胎的铰接集材拖运机零件的命名
SAE J 1111-2002 集材机抓钩零件的命名
SAE J 1113-1-2002 (R) ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURES AND LIMITS FOR COMPONENTS OF VEHICLES. BOATS (UP TO 15 M). AND MACHINES (EXCEPT AIRCRAFT) (50HZ TO 18 GHZ)
SAE J 1113-11-2000 IMMUNITY TO CONDUCTED TRANSIENTS ON POWER LEADS
SAE J 1113-12-2000 ELECTRICAL INTERFERENCE BY CONDUCTION AND COUPLING - COUPLING CLAMP AND CHATTERING RELAY
SAE J 1113-13-2002 ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURE FOR VEHICLE COMPONENTS - PART 13 IMMUNITY TO ELECTROSTATIC DISCHARGE
SAE J 1113-2-1996 (R) ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURES AND LIMITFOR VEHICLE COMPONENTS (EXCEPT AIRCRAFT) - CONDUCTED IMMUNITY. 15 HZ TO 250 KHZ - ALL LEADS
SAE J 1113-21-1998 (R) ELECTRONMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURE FOR VEHICLE COMPONENTS - PART 21 IMMUNITY TO ELECTROMAGNETIC FIELDS. 30 MHZ TO 18 GHZ. ABSORBER-LINED CHAMBER
SAE J 1113-22-2003 ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURE FOR VEHICLE COMPONENTS-PART 22 - IMMUNITY TO RADIATED MAGNETIC FIELDS
SAE J 1113-24-2000 IMMUNITY TO RADIATED ELECTROMAGNETIC FIELDS - 10 KHZ TO 200 MHZ - CRAWFORD TEM CELL AND 10 KHZ TO 5 GHZ - WIDEBAND TEM CELL
SAE J 1113-25-1999 ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURE FOR VEHICLE COMPONENTS - IMMUNITY TO RADIATED ELECTROMAGNETIC FIELDS. 10KHZ TO500MHZ - TRI-PLATE LINE METHOD
SAE J 1113-26-2001 ELECTROMAGNETIC COMPATABILITY MEASUREMENT PROCEDURE FOR VEHICLE COMPONENTS - IMMUNITY TO AC POWER LINE ELECTRIC FIELDS
SAE J 1113-27-1995 (R) ELECTROMAGNETIC COMPATIBILITY MEASUREMENTS PROCEDURE FOR VEHICLE COMPONENTS - PART 27 - IMMUNITY TO RADIATED ELECTROMAGNETIC FIELDS— - MODE STIR REVERBERATION METHOD
SAE J 1113-3-1995 CONDUCTED IMMUNITY. 250 KHZ TO 500 MHZ. DIRECT INJECTION OF RADIO FREQUENCY (RF) POWER
SAE J 1113-4-1998 (R) IMMUNITY TO RADIATED ELECTROMAGNETIC FIELDS - BULK CURRENT INJECTION (BCI) METHOD
SAE J 1113-41-2000 LIMITS AND METHODS OF MEASUREMENT OF RADIO DISTURBANCE CHARACTERISTICS OF COMPONENTS AND MODULES FOR THE PROTECTION OF RECEIVERS USED ON BOARD VEHICLES
SAE J 1113-42-2000 ELECTROMAGNETIC COMPATIBILITY--COMPONENT TEST PROCEDURE--PART 42--CONDUCTED TRANSIENT EMISSIONS
SAE J 1114-2000 油箱加油口螺纹和帽系留装置
SAE J 1115-1976 GUIDELINES FOR DEVELOPING AND REVISING SAE NOMENCL
SAE J 1116-1999 越野自行式工作机械的种类
SAE J 1117-1986 液压阀差压流动特性的测量方法和报告
SAE J 1118-2002 摩托车制动系统试验程序液压阀
SAE J 1119-2002 STEEL PRODUCTS FOR ROLLOVER PROTECTIVE STRUCTURES (ROPS) AND FALLING OBJECT PROTECTIVE STRUCTURES (FOPS)
SAE J 112-1977 ELECTRIC WINDSHIELD WIPER SWITCH
SAE J 1120-1989 球形棒端
SAE J 1121-1988 螺旋形压缩簧和拉伸簧术语
SAE J 1122-1988 螺旋形弹簧特性检查清单
SAE J 1123-1992 米制汽车悬架用板簧
SAE J 1124-1987 流体过滤器和过滤器测试的名词汇编
SAE J 1127-2000 蓄电池用电缆
SAE J 1128-2000 低拉力初级电缆
SAE J 1131-1998 用于汽车空气制动系统的SAE J844d非金属管件和连接组件的性能要求
SAE J 1133-1996 学校班车用止动杆
SAE J 1134-2000 节点固定架
SAE J 1137-2002 HYDRUALIC VALVES FOR MOTOT VEHICLE BRAKE SYSTEMS - PERFORMANCE REQUIREMENTS
SAE J 1138-1999 DESIGN CRITERIA - DRIVER HAND CONTROLS LOCATION FOR PASSENGER CARSMULTIPURPOSE PASSENGER VEHICALS. AND TRUCKS
SAE J 1139-1999 DIRECTION-OF-MOTION STEREOTYPES FOR AUTOMOTIVE HAND CONTROLS
SAE J 114-1994 座位安全带组件带子耐磨损的性能要求
SAE J 1142-1994 轿车、有蓬运货汽车和轻型卡车牵引能力的设计准则和设备的使用
SAE J 1143-1994 轿车、有蓬运货汽车和轻型卡车牵引车及牵引设备的测试程序
SAE J 1144-2000 轿车、有蓬运货汽车和轻型卡车牵引车驱动力的测试程序
SAE J 1147-1983 焊接、硬焊焊及软焊焊的材料规程
SAE J 1148-1997 发动机充气空气冷却器的命名
SAE J 1149-1991 空气制动系统的金属管件
SAE J 115-2003 安全信号
SAE J 1151-1991 用气相色谱法测量甲烷
SAE J 1153-1991 机动车辆制动装置的液压主缸的测试程序
SAE J 1154-1991 机动车辆制动装置的液压主缸的性能要求
SAE J 1158-1996 SPECIFICATION DEFINITIONS - WINCHES FOR CRAWLER TRACTORS AND SKIDDERS
SAE J 1160-1983 雪地车辆驾驶员耳部声级的测量程序
SAE J 1161-1983 雪地车辆运行声级的测量程序
SAE J 1163-1997 测定座位标定点
SAE J 1165-1986 液压流体清洁度级别的报告
SAE J 1166-1998 土方机械驾驶员工作环境的声测量
SAE J 1167-1998 摩托车停车灯的开关
SAE J 1168-2002 摩托车倾斜角的测量程序
SAE J 1169-1998 静态条件下轻型车辆发出声级的测量
SAE J 1171-1986 船上用电气设备外部着火的防护
SAE J 1172-1993 密封法兰发动机飞轮罩
SAE J 1173-1988 喷丸用玻璃球大小分类及特性的推荐规程
SAE J 1174-1985 小型发动机动力设备操作人员耳际声级测量程序
SAE J 1175-1985 小型发动机动力设备旁观者位置声级测量程序
SAE J 1176-1986 液压系统外部渗漏的分类
SAE J 1177-2002 液压挖掘机驾驶员的控制装置
SAE J 1179-2002 液压挖掘机的挖掘力
SAE J 1180-1980 伸缩杆长度指示系统
SAE J 1183-1998 RECOMMENDED GUIDELINES FOR FATIGUE TESTING OF ELASTOMERIC MATERIALS AND COMPONENTS
SAE J 119-1987 纤维板折弯测试
SAE J 1191-1986 船舶高电压点火电缆组件
SAE J 1194-1999 轮式农用拖拉机的翻滚保护结构(ROPS)
SAE J 1197-2002 无垂直起重杆的装有木或其它材料抓斗的装载机的额定运行装载量
SAE J 1199-2001 米制外螺纹钢紧固件的机械和材料要求
SAE J 1200-1998 BLIND RIVETS - BREAK MANDREL TYPE
SAE J 1204-1997 娱乐和多用途挂车轮子的测试程序
SAE J 1205-1997 PERFORMANCE REQUIREMENTS FOR SNAP-IN TUBELESS TIRE VALVES
SAE J 1206-1997 METHODS FOR TESTING SNAP-IN TUBELESS TIRE VALVES
SAE J 1207-2000 测定发动机进气和排气消声器效果的测量程序
SAE J 1209-1994 移动式林业机械识别术语
SAE J 121-1997 淬硬及回火螺纹件的脱碳
SAE J 1211-1978 RECOMMENDED ENVIRONMENTAL PRACTICES FOR ELEC EQUIP
SAE J 1212-1985 FIRE PREVENTION ON FORESTY EQUIPMENT
SAE J 1213-2-1988 GLOSSARY OF RELIABILITY TERMINOLOGY ASSOCIATED WITH AUTOMOTIVE ELECTRONICS
SAE J 12131-1997 用于各种数据通讯的车辆网络词汇
SAE J 1214-2002 娱乐车辆轮胎与车身的间隙检查
SAE J 121M-1997 DECARBURIZATION IN HARDENED AND TEMPERED METRIC THREADED FASTENERS
SAE J 122-1998 SURFACE DISCONTINUITIES ON NUTS
SAE J 1222-1995 雪地汽车的速度控制保险
SAE J 1223-2000 船舶发动机用化油器
SAE J 1226-1983 路面车辆电气速度计的规格
SAE J 1227-1986 液压动力零件和系统的洁凈度评定
SAE J 1228-2002 船舶发动机的评定规范
SAE J 1229-1981 卡车软管的标识术语
SAE J 123-1994 螺栓,螺纹,螺母表面断续疲劳试验
SAE J 1231-2001 卷曲软管连接件
SAE J 1232-2000 PASSENGER AND LIGHT TRUCK TIRE TRACTION DEVICE PROFILE DETERMINATION AND CLASSIFICATION
SAE J 1233-1985 越野工作机械的规范定义
SAE J 1235-1986 液压流体动力阀内部渗漏的测量和报告
SAE J 1236-1995 CAST IRON SEALING RINGS (METRIC)
SAE J 1237-2001 METRIC THREAD ROLLING SCREWS
SAE J 1238-1998 RATING LIFT CRANES ON FIXED PLATFORMS OPERATING IN THE OCEAN ENVIRONMENT
SAE J 1239-2003 FOUR-. FIVE-. AND EIGHT-CONDUCTOR ELECTRICAL CONNECTORS FOR AUTOMOTIVE TYPE TRAILERS
SAE J 1240-1991 FLYWHEEL SPIN TEST PROCEDURE
SAE J 1241-1999 FUEL AND LUBRICANT TANKS MOTORCYCLES
SAE J 1242-1991 声辐射的测量方法
SAE J 1244-2003 润滑油冷却器的命名和词汇
SAE J 1246-2003 凸面镜曲率半径的测量
SAE J 1247-2002 SIMULATED MOUNTAIN-BRAKE PERFORMANCE TEST PROCEDURE
SAE J 1248-2002 摩托车停车稳定性的性能要求
SAE J 1249-2000 以前的SAE标准和SAE钢
SAE J 125-1988 ELEVATED TEMPERATURE PROPERTIES OF CAST IRONS
SAE J 1252-1981 卡车和大轿车的SAE风洞测试程序
SAE J 1253-1993 发动机低温摇动起动负荷的要求
SAE J 1254-2002 伐木机捆束机零件的命名
SAE J 1257-1980 悬臂起重机的能力图表
SAE J 1259-1989 米制球形杆端
SAE J 126-1986 热轧和冷轧钢薄板和带材的选择及性能规定方法
SAE J 1260-1994 标准油过滤器测试用油
SAE J 1261-1984 AGRICULTURAL TRACTOR TIRE DYNAMIC INDICES
SAE J 1263-1996 用下降功率技术进行的道路加载量测量和测功计模拟
SAE J 1264-1986 (短时间运行车辆)I型RCCCSAE联合燃料消耗测试程序
SAE J 1266-2001 车轴效率的测试程序
SAE J 1267-1988 LEAKAGE TESTING
SAE J 1268-1995 (R) HARDENABILITY BANDS FOR CARBON AND ALLOY H STEELS
SAE J 1269-2000 轿车、轻型卡车、公路卡车和大轿车轮胎的抗滚动测量程序
SAE J 1270-2000 MEASUREMENT OF PASSENGER CAR. LIGHT TRUCK. AND HIGHWAY TRUCK AND BUS TIRE ROLLING RESISTANCE
SAE J 1272-2003 伐木头的命名和术语
SAE J 1273-2002 软管和软管组件的选择、安装和维修
SAE J 1276-1986 液压零件测试用标准化液体
SAE J 1277-1990 评定新的液压流体清洁度级别的方法
SAE J 1278-1993 国际单位制(米制)同步皮带轮
SAE J 1279-1995 雪地汽车的传动机械
SAE J 128-1994 OCCUPANT RESTRAINT SYSTEM EVALUATION-PASSENGER CAR
SAE J 1281-1985 娱乐摩托艇驾驶员所经受(噪声)声级的估算程序
SAE J 1282-2003 雪地汽车的制动控制系统
SAE J 1283-2000 用于施工、农业和越野机械辅助启动的电气连接器
SAE J 1284-1988 片式熔断器
SAE J 1286-1987 静电外侧斥力
SAE J 1287-1998 摩托车排气声级的静态测量
SAE J 1288-1999 PACKAGING. STORAGE. AND SHELF LIFE OF HYDRAULIC BRAKE HOSE ASSEMBILIES
SAE J 1289-1981 流动式起重机的稳性额定值
SAE J 129-1981 ENGINE AND TRANSMISSION IDENTIFICATION NUMBERS
SAE J 1290-2002 汽车液压制动系统.米制管接头
SAE J 1291-2002 汽车液压制动系统.米制对接螺栓连接
SAE J 1292-1981 AUTOMOBILE. TRUCK. TRUCK-TRACTOR. TRAILER. AND MOT
SAE J 1293-1990 UNDERVEHICLE COUPON CORROSION TESTS
SAE J 1294-1986 船舶点火分电盘
SAE J 1297-2002 汽车代用燃料
SAE J 1298-1997 液压系统诊断孔尺寸和位置
SAE J 1299-2003 越野自卸电力驱动控制
SAE J 1301-2003 TRUCK DEFORMATION CLASSIFICATION
SAE J 1303-1985 装载机纵向切削刃的横截面
SAE J 1304-1985 带螺栓孔的装载机纵向切削刃的横截面
SAE J 1305-1987 TWO - BLOCK WARNING AND LIMIT SYSTEMS IN LIFTING
SAE J 1306-2002 摩托车辅助前照灯
SAE J 1307-2002 挖掘机和反铲车用手语
SAE J 1308-1999 FAN GUARD FOR OFF-ROAD MACHINES
SAE J 1309-2003 履带式液压挖掘机的行走性能
SAE J 131-2003 摩托车转向信号灯
SAE J 1310-1993 ELECTRIC ENGINE PREHEATERS AND BATTERY WARMERS FOR DIESEL ENGINES
SAE J 1312-1995 柴油和火花点火发动机性能标记程序
SAE J 1313-1993 汽车同步皮带传动
SAE J 1315-1991 越野轮胎和轮辋的选择与应用
SAE J 1317-1982 越野自卸车的电力驱动转动设备
SAE J 1318-1998 特许的紧急事故维修和服务车的排气警告灯
SAE J 1319-1993 尾部雾灯系统
SAE J 1320-1987 船舶电开关
SAE J 1321-1986 II型YMCSAE混合燃料消耗的测试程序
SAE J 1323-2003 纤维板标准分类系统
SAE J 1324-1989 绝热材料的测试程序
SAE J 1325-1994 TEST METHOD FOR MEASURING WET COLOT TRANSFER CHARACTERISTICS
SAE J 1326-1985 测量湿润传色特性的测试方法
SAE J 133-2003 商用挂车和半挂车的连接轮主销的性能
SAE J 1330-2000 亮度测定的实验室精确度导则
SAE J 1332-1981 绳索滚筒旋转指示装置
SAE J 1333-1990 液压缸推杆的腐蚀测试
SAE J 1334-2003 (R) HYDRAULIC CYLINDER INTEGRITY TEST
SAE J 1335-1990 液压缸的无载磨擦测试
SAE J 1336-1987 HYDRAULIC CYLINDER LEAKAGE TEST
SAE J 1337-1997 OFF-ROAD RIM MAINTENANCE PROCEDURES AND SERVICE PRECAUTIONS
SAE J 1339-2002 测量发动机冷却风扇功率损耗的试验方法
SAE J 134-1993 轿车和轻型货车-挂车制动系统的道路测试规范
SAE J 1340-2003 测量卡车和大轿车空调和动压缩机功率损耗的试验方法
SAE J 1341-2003 测量卡车和大轿车液压泵功率损耗的试验方法
SAE J 1342-2001 测量卡车和大轿车风扇驱动系统功率损耗试验方法
SAE J 1343-2000 有关卡车和大轿车发动机附件工作循环和平均功率要求的信息
SAE J 1344-1997 塑料部件的标志
SAE J 1346-1981 GUIDE TO MANIFOLD ABSOLUTE PRESSURE TRANSDUCER PRE
SAE J 1347-1996 GUIDE TO MANIFOLD ABSOLUTE PRESSURE TRANSDUCER REPRESENTATIVE SPECIFICATION
SAE J 1349-1995 火花点火和柴油发动机功率的测试程序
SAE J 135-1993 伺服剎车系统性能要求
SAE J 1350-1988 SELECTION AND APPLICATION GUIDELINES FOR DIESEL. GASOLINE. AND PROPANE FIRED LIQUID COOLED ENGINE PRE - HEATERS
SAE J 1351-1993 绝缘材料加热气味的测试
SAE J 1352-1994 绝缘填料的压缩和复原
SAE J 1353-2002 夹钳运木集材机的命名
SAE J 1354-2002 传送装置的命名
SAE J 1355-1993 弹性绝缘填料厚度的测试方法
SAE J 1356-2002 MINIMUM PERFORMANCE CRITERIA FOR FALLING OBJECT GUARDS FOR EXCAVATORS
SAE J 1360-1987 越野工作机械产品识别编码系统
SAE J 1361-2001 评价材料抗热和绝热性的热板方法
SAE J 1362-2003 越野自行式工作机械驾驶员操作和显示用图形符号
SAE J 1366-2000 RATING LIFT CRANES OPERATING ON PLATFORMS IN THE OCEAN ENVIRONMENT
SAE J 1367-1981 球形联轴节和球形拉杆端性能测试程序
SAE J 1368-1997 儿童乘车安全带的固定和连接金属件
SAE J 1369-1997 ANCHORAGE PROVISIONS FOR INSTALLATION OF CHILD RESTRAINT TETHER STRAPS IN REAR SEATING POSITIONS
SAE J 1372-1988 土方机械静态声功率测定
SAE J 1373-1996 尾部转向信号灯
SAE J 1374-1985 液压缸推杆密封圈耐久性测试程序
SAE J 1375-1997 起动马达的应用考虑
SAE J 1377-1989 传动装置车辆速度信号转子的特殊要求
SAE J 1378-1998 ELECTRIC HOURMETER SPECIFICATION
SAE J 138-1969 FILM ANALYSIS GUIDES FOR DYNAMIC STUDIES OF TEST S
SAE J 1383-1996 机动车辆前照灯的性能要求
SAE J 1384-1993 驾驶员座位振动性能的评价
SAE J 1386-1986 驾驶员座位振动测试的农业轮式拖拉机的分类
SAE J 1388-2003 PERSONNEL PROTECTION - SKID STEER LOADERS
SAE J 1389-2001 CORROSION TEST FOR INSULATION MATERIALS
SAE J 139-1999 点火系统的命名法和术语
SAE J 1390-2003 发动机冷却风扇的结构分析
SAE J 1392-2001 高强度热轧薄钢板和钢带、冷轧薄钢板和镀覆的薄钢板
SAE J 1393-1999 公路卡车的冷却测试规范
SAE J 1394-2000 米制非金属空气制动系统管件
SAE J 1397-1992 钢棒的预测机械性能和可加工性
SAE J 1399-1984 电转速计的特性
SAE J 140-1995 SEAT BELT HARDWARE TEST PROCEDURE
SAE J 1400-1990 汽车材料和组件的气导隔声性能的实验室测量
SAE J 1401-2003 使用非石油基液压流体的道路车辆的液压制动软管组件
SAE J 1402-1985 汽车空气制动软管和软管组件
SAE J 1403-1989 真空制动软管
SAE J 1404-1993 脚剎车结构完整性要求.10000Ib(4500kg)以上车辆
SAE J 1405-1990 OPTIONAL TEST PROCEDURES FOR HYDRAULIC HOSE ASSEMBLIES
SAE J 1406-2002 机动车辆液压制动软管的应用
SAE J 1409-1998 空气制动阀测试程序
SAE J 141-1995 SEAT BELT HARDWARE PERFORMANCE REQUIREMENTS
SAE J 1410-1998 (R) AIR BRAKE VALVE - PERFORMANCE REQUIREMENTS
SAE J 1416-2001 GENERATOR TERMINAL LABELING
SAE J 1418-2002 燃油喷射泵.用于测试的高压管
SAE J 1419-1999 燃油喷射泵的轴和轮毂的锥度
SAE J 1422-1996 柴油发动机的燃料加热器
SAE J 1423-2003 用于轿车、带蓬货车和轻型卡车的节能发动机油的分类
SAE J 1424-2002 12000Ib以下车辆使用的货物装卸照明灯
SAE J 1428-1985 船舶电路断路器
SAE J 1432-2000 REAR HIGH MOUNTED STOP LAMPS AND REAR HIGH MOUNTED TURN SIGNAL LAMPS FOR USE ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH
SAE J 1434-1989 WROUGHT ALUMINUM APPLICATIONS GUIDELINES
SAE J 1436-1995 (R) REQUIREMENTS FOR ENGINE COOLING SYSTEM FILLING. DEAERATION. AND DRAWDOWN TESTS
SAE J 1440-1993 林业机械的越野轮胎和轮辋分类
SAE J 1441-1998 SUBJECTIVE RATING SCALE FOR VEHICLE HANDLING
SAE J 1442-2003 高强度热轧钢板、棒材和型材
SAE J 1444-2003 小型发动机驱动的发电机组瞬变反应的评定程序
SAE J 1447-1986 FIRE - RESISTANT FLUID USAGE IN HYDRAULIC SYSTEMS
SAE J 1449-2002 船舶的图形符号
SAE J 1450-2001 空气制动传动装置隔板测试程序
SAE J 1451-2000 A DICTIONARY OF TERMS FOR THE DYNAMICS AND HANDLING OF SINGLE TRACK VEHICLES
SAE J 1452-2002 挂车级停车性能的测试程序
SAE J 1453-2002 O型环表面密封附件
SAE J 1454-1995 越野工作机械座垫的动态耐久性测试
SAE J 1455-1994 (R) RECOMMENDED ENVIRONMENTAL PRACTICES FOR ELECTRONIC EQUIPMENT DESIGN IN HEAVY-DUTY VEHICLE APPLICATIONS
SAE J 1456-1995 内燃机飞轮的最大允许旋转速度
SAE J 1459-2001 V型肋状皮带和皮带轮
SAE J 1460-1-2000 HUMAN MECHANICAL IMPACT RESPONSE CHARACTERISTICS - DYNAMIC RESPONSE OF THE HUMAN ABDOMEN
SAE J 1460-2-1998 (R) HUMAN MECHANICAL IMPACT RESPONSE CHARACTERISTICS - RESP0NSE OF THE HUMAN NECK TO INERTIAL LOADING BY THE HEAD FOR AUTOMOTIVE SEATED POSTURES
SAE J 1461-2003 手动松紧调节器的测试程序
SAE J 1462-1994 自动松紧调节器的测试程序
SAE J 1463-2003 拉型离合器传动装置安装尺寸
SAE J 1464-2002 IDENTIFICATION TERMINOLOGY OF LOADERSTRACTORS WITH FORKS AND ROUGH TERRAIN FORKLIFTS
SAE J 1467-1993 封管机的固定件
SAE J 1468-1999 APPLICATION TESTING OF OIL-TO-AIR OIL COOLERS FOR HEAT TRANSFER PERFORMANCE
SAE J 1469-2001 AIR BRAKE ACTUATOR TEST PROCEDURE. TRUCK-TRACTOR. BUS. AND TRAILERS
SAE J 1470-1998 加速的公路车辆的辐射噪声的测量
SAE J 1472-1998 碾压机的制动性能
SAE J 1474-2003 HEAVY-DUTY NONMETALLIC ENGINE COOLING FANS-MATERIAL. MANUFACTURINGAND TEST CONSIDERATIONS
SAE J 1475-1996 船舶用液压软管接头
SAE J 1476-1999 重量为10000磅(4500公斤)以上GVWR车辆的停车制动结构完整性测度试程序
SAE J 1477-2000 轻型车辆内部声级的测量
SAE J 1479-1999 汽车拉型离合器术语
SAE J 1487-2003 空调蒸发器送风和与冷却能力额定值
SAE J 1488-1997 乳化水燃料分离测试程序
SAE J 1489-2000 重型卡车和大轿车减速器下坡性能绘图程序
SAE J 1490-1999 MEASUREMENT AND PRESENTATION OF TRUCK RIDE VIBRATI
SAE J 1492-1998 MEASUREMENT OF LIGHT VEHICLE STATIONARY EXHAUST SYSTEM SOUND LEVEL ENGINE SPEED SWEEP METHOD
SAE J 1493-2002 启动系统激发的屏蔽
SAE J 1494-2001 蓄电池放大器电缆
SAE J 1495-1998 TEST PROCEDURE FOR BATTERY FLAME RETARDANT VENTING SYSTEMS
SAE J 1497-1994 成形在位的垫圈设计导则
SAE J 1498-1998 HEATING VALUE OF FUELS
SAE J 1499-1997 带式摩擦测试机器.(SAE)测试程序
SAE J 1502-1997 液压诊断联轴器
SAE J 1503-1998 空气调节的、加热的和通风的越野自行式工作机械的性能测试
SAE J 1505-1995 商用车辆制动力分布试验规范
SAE J 1508-1997 软管夹具规格
SAE J 151-1999 冷却系统的压力释放
SAE J 1510-2001 LUBRICANTS FOR TWO-STROKE-CYCLE GASOLINE ENGINES
SAE J 1511-1994 越野橡胶轮胎机械的方向控制
SAE J 1512-2002 MANUAL SLACK ADJUSTER PERFORMANCE REQUIREMENTS
SAE J 1513-1994 自动松紧调节器性能要求
SAE J 1515-1995 IMPACT OF ALTERNATIVE FUELS ON ENGINE TEST AND REPORTING PROCEDURES
SAE J 1516-1998 驾驶室操作设备基准点
SAE J 1517-1998 驾驶员选择的座位位置
SAE J 1518-2003 三点挂接(A型)反铲车的人员保护
SAE J 1521-1998 离合器和加速器卡车驾驶员腿关节位置
SAE J 1522-1990 卡车驾驶员腹部位置
SAE J 1523-1993 汽车用胶粘剂的金属与金属搭接剪切强度的测试
SAE J 1524-1995 汽车密封与隔音用胶粘剂的粘度测试
SAE J 1525-1985 汽车纤维增强塑料粘接用胶粘剂的搭接剪切测试
SAE J 1526-1987 III型TMCSAE混合燃料运行中消耗的测试程序
SAE J 1527-1993 船用燃料软管
SAE J 1528-1990 悬挂弹簧片的疲劳试验规程
SAE J 1529-1986 静态玻璃粘合用汽车密封胶的搭接剪切测试
SAE J 153-1987 驾驶员的安全措施
SAE J 1530-2003 汽车地毯材料的耐磨损、耐起球和耐掉纤维的测试方法
SAE J 1532-1995 传动装置的油冷却器的软管
SAE J 1533-1993 OPERATOR ENCLOSURE AIR FILTER ELEMENT TEST PROCEDURE. RECOMMENDED PRACTICE
SAE J 1535-1996 PERFORMANCE TEST FOR WINDSHIELD DEFROSTING SYSTEMS FOR OFF-ROAD. SELF-PROPELLED WORK MACHINES
SAE J 1536-2001 二冲程发动机油的溶混性流动性分类
SAE J 1537-1990 用于汽油注入系统的电动燃料泵的确认测试
SAE J 1538-2001 (R) GLOSSARY OF AUTOMOTIVE INFLATABLE RESTRAINT SYSTEMS
SAE J 1540-2000 MANUAL TRANSMISSION AND TRANSAXLE EFFICIENCY AND PARASITIC LOSS MEASUREMENT
SAE J 1541-2003 火花点火发动机燃料喷射系统的命名
SAE J 1542-2003 车辆和工业热交换器的热循环持久性实验室测试
SAE J 1544-1988 REVOLUTIONS PER MILE AND STATIC LOADED RADIUS FOR OFF-ROAD TIRES
SAE J 1545-1986 外部面饰、织物和彩色装饰材料色差仪器测量
SAE J 1549-1988 柴油喷射泵.喷嘴架组件校准的认可
SAE J 1553-1995 汽车纤维增强塑料粘接用胶粘剂的撕裂测试
SAE J 1555-2000 RECOMMENDED PRACTICE FOR OPTIMIZING AUTOMOBILE DAMAGEABILITY
SAE J 1556-1997 STATIONARY SAFETY GLASS REPLACEMENT
SAE J 1559-1995 MEASUREMENT OF SOLAR HEATING EFFECT
SAE J 156-2000 熔断丝
SAE J 1561-2001 轿车轮胎的速度实验室测试程序
SAE J 1562-1999 SELECTION OF ZINC AND ZINC-ALLOY (HOT-DIPPED AND ELECTRODEPOSITED)COATED STEEL SHEET
SAE J 1563-1993 GUIDELINES FOR LABORATORY CYCLIC CORROSION TEST PROCEDURES FOR PAINTED AUTOMOTIVE PARTS
SAE J 1568-2001 用于液压盘式制动柱的塑料活塞用材料
SAE J 1570-1991 用于液压盘式制动装置固定的橡皮防尘罩
SAE J 1573-2003 可弯保险杠修理
SAE J 1574-1-2000 MEASUREMENT OF VEHICLE AND SUSPENSION PARAMETERS FOR DIRECTIONAL CONTROL STUDIES
SAE J 1574-2-2000 MEASUREMENT OF VEHICLE AND SUSPENSION PARAMETERS FOR DIRECTIONAL CONTROL STUDIES - RATIONALE
SAE J 1577-1991 可换式摩托车前照灯灯泡
SAE J 1578-2003 摩托车侧支架回位的测试程序
SAE J 1579-2003 摩托车侧支架回位的性能要求
SAE J 1580-1989 切削刃及端头的米制埋头孔
SAE J 1581-1989 装载机直式切削刃的运行横截面及尺寸
SAE J 1587-2002 重型车辆应用中微机系统之间的电子数据交换
SAE J 1588-1998 内燃机活塞环词汇
SAE J 1589-1998 内燃机活塞环检查测量原则
SAE J 159-2002 (R) RATED CAPACITY SYSTEM
SAE J 1590-1998 内燃机活塞环材料特性
SAE J 1591-1998 内燃机活塞环通用特性
SAE J 1594-1994 车辆空气动力学术语
SAE J 1596-1989 自动V形肋状皮带传动和测试方法
SAE J 1597-1999 车辆和工业用热交换器在诱振动荷载条件下持久性实验室测试
SAE J 1598-1999 车辆和工业用热交换器的减振装载条件下持久性实验室测试
SAE J 160-2001 制动衬垫的膨胀和尺寸稳定性
SAE J 1601-1997 液压制动汽缸的皮碗
SAE J 1603-1995 液压盘式制动汽缸橡胶密封
SAE J 1604-1995 RUBBER BOOTS FOR DRUM-TYPE HYDRAULIC BRAKE WHEEL CYLINDERS
SAE J 1605-1992 BRAKE MASTER CYLINDER RESERVOIR DIAPHRAGM GASKET
SAE J 1606-1997 HEADLAMP DESIGN GUIDELINES FOR MATURE DRIVERS
SAE J 1608-2001 MANUAL TRANSMISSION SHIFT PATTERNS
SAE J 1609-2002 AIR RESERVOIR CAPACITY PERFORMANCE GUIDE - COMMERCIAL VEHICLES
SAE J 1610-2001 TEST METHOD FOR EVALUATING THE SEALING CAPABILITY OF HOSE CONNECTIONS WITH A PVT TEST FACILITY
SAE J 1611-1998 浅槽设备.操作控制设备
SAE J 1614-1998 WIRING DISTRIBUTION SYSTEMS FOR CONSTRUCTION. AGRICULTURAL. AND OFF-ROAD WORK MACHINES
SAE J 1615-2001 THREAD SEALANTS
SAE J 1616-1994 RECOMMENDED PRACTICE FOR COMPRESSED NATRUAL GAS VEHICLE FUEL
SAE J 1617-1993 BODY CORROSION-A COMPREHENSIVE INTRODUCTION
SAE J 1618-2000 CONTINUOUSLY VARIABLE TRANSMISSION TEST CODE FOR PASSENGER CARS
SAE J 1619-1997 SINGLE TOOTH GEAR BENDING FATIGUE TEST
SAE J 1621-1994 ENGINE RETAREER DYNAMOMETER TEST AND CAPABILITY RATING PROCEDURE
SAE J 1623-1994 ALL-TERRAIN VEHICAL HEADLAMPS
SAE J 1624-2000 FUEL CROSSOVER LINE
SAE J 1625-1996 HEAVY-DUTY CIRCUIT BREAKERS
SAE J 1626-1999 拖车的空气制动设备用于制动,稳定和控制性能的测试过程
SAE J 1627-1995 RATING CRITERIA FOR ELECTRONIC REFRIGERANT LEAK DETECTORS
SAE J 1628-1998 TECHNICIAN PROCEDURE FOR USING ELECTRONIC REFRIGERANT LEAK DETECTORS FOR SERVICE OF MOBILE AIR CONDITIONING SYSTEMS
SAE J 163-2001 LOW TENSION WIRING AND CABLE TERMINALS AND SPLICE CLIPS
SAE J 1630-2001 DRIVER OR PASSENGER AIRBAG MODULE DEPLOYMENT TEST PROCEDURE
SAE J 1633-2000 LABORATORY SPEED TEST PROCEDURE FOR LIGHT TRUCK TIRES
SAE J 1636-1993 RECOMMENDED GUIDELINES FOR LOADDEFORMATION TESTING OF ELASTOMERIC COMPONENTS
SAE J 1637-1993 助动钢棒的振动阻尼的实验室测量
SAE J 1638-1993 COMPRESSION SET OF HOSES OR SOLID DISCS
SAE J 1639-1995 CLASSIFICATION SYSTEM FOR AUTOMOTIVE POLYAMIDE (PA) PLASTICS
SAE J 164-1997 散热器盖及漏斗颈
SAE J 1644-1998 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE-TEST METHODS FOR THREADED HYDRAULIC FLUID POWER CONNECTORS
SAE J 1645-1999 FUEL SYSTEM ELECTROSTATIC CHARGE
SAE J 1646-1996 GLOSSARY OF TERMS - LUBRICATED FRICTION SYSTEMS
SAE J 1647-1995 PLASTIC MATERIALS AND COATINGS FOR USE IN OR ON OPTICAL PARTS SUCHAS LENSES AND REFLECTORS OF HIGH-INTENSITY DISCHARGE FORWARD LIGHTING DEVICES USED IN MOTOR VEHICLES
SAE J 1648-1996 PROTECTIVE COATINGS FOR FASTENERS
SAE J 1650-1997 SEAMLESS COPPER-NICKEL 90-10 TUBING
SAE J 1651-1994 METRIC YOKE TYPE ROD ENDS
SAE J 1654-2000 HIGH VOLTAGE PRIMARY CABLE
SAE J 1655-1996 PREDICTIVE AND PREVENTIVE DIAGNOSTIC MAINTENANCE OF HYDRAULIC SYSTEMS
SAE J 1657-1999 SELECTION CRITERIA FOR RETROFIT REFRIGERANTS TO REPLACE R-12 IN MOBILE AIR CONDITIONING SYSTEMS
SAE J 1658-1999 ALTERNATE REFRIGERANT CONSISTENCY CRITERIA FOR USE IN MOBILE AIR CONDITIONING SYSTEMS
SAE J 1659-1999 VEHICLE TESTING REQUIREMENTS FOR REPLACEMENT REFRIGERANTS FOR CFC-12 (R12) MOBILE AIR CONDITIONING SYSTEMS
SAE J 1660-1998 FITTINGS AND LABELS FOR RETROFIT OF CFC-12 (R12) MOBILE AIR CONDITIONING SYSTEMS TO HFC-134A (R134A)
SAE J 1661-1998 PROCEDURE FOR RETROFITTING CFC-12 (R12) MOBILE AIR CONDITIONING SYSTEMS TO HFC-134A (R134A)
SAE J 1662-1998 COMPATIBILITY OF RETROFIT REFRIGERANTS WITH AIR CONDITIONING SYSTEM MATERIALS
SAE J 1663-1995 TRUTH-IN-LABELING STANDARD FOR NAVIGATION MAP DATABASES
SAE J 1667-1996 SNAP-ACCELERATION SMOKE TEST PROCEDURE FOR HEAVY-DUTY DIESEL POWERED VEHICLES
SAE J 1668-1999 内燃机引擎燃料喷射管试验
SAE J 167-2002 用于农业拖拉机的高架保护的测试程序和性能要求
SAE J 1670-1993 TYPE F CLAMPS FOR PLUMBING APPLICATIONS
SAE J 1671-1997 OUTBOARD MOUNTED BRAKE DRUMDISC WHEEL HUB INTERFACE DIMENSIONS COMMERCIAL VEHICLES
SAE J 1673-1996 HIGH VOLTAGE AUTOMOTIVE WIRING ASSEMBLY DESIGN
SAE J 1674-1998 EARLY ACQUISITION AND PRESERVATION OF INFORMATION IN A MOTOR VEHICLE ACCIDENT
SAE J 1677-2004 (R) TESTS AND PROCEDURES FOR STEEL AND COPPER NICKEL TUBING
SAE J 1678-2004 LOW VOLTAGE ULTRA THIN WALL PRIMARY CABLE
SAE J 1679-1994 PEEL STRENGTH OF SOFT TRIM ADHESIVES
SAE J 1681-2000 GASOLINE. ALCOHOL. AND DIESEL FUEL SURROGATES FOR MATERIALS TESTING
SAE J 1682-1993 VALVE GUIDE INFORMATION REPORT
SAE J 1683-1997 MS-DOS TM INTERFACE FOR J1708 COMMUNICATIONS
SAE J 1684-2000 TEST METHOD FOR EVALUATING THE ELECTROCHEMICAL RESISTANCE OF COLLANT SYSTEM HOSES AND MATERIALS
SAE J 1685-1995 CLASSIFICATION SYSTEM FOR AUTOMOTIVE ACRYLONITRILEBUTADIENESTYRENE (ABS) AND ABS + POLYCARBONATE BLENDS (ABS+PC) BASED PLASTICS
SAE J 1689-1994 HYDRAULIC POWER UNITS USED ON MACHINE TOOLS AND EQUIPMENT FOR THE AUTOMOTIVE INDUSTRY
SAE J 169-1985 DESIGN GUIDELINES FOR AIR CONDITIONING SYSENCLOSR
SAE J 1690-1996 FLASHERS
SAE J 1691-1997 PLASTIC AUTOMOTIVE SAFETY GLAZING
SAE J 1692-1993 VALVE SEAT INSERT INFORMATION REPORT
SAE J 1693-1994 REMANUFRACTURED HUDRAULIC MASTER CYLINDER FOR MOTER VEHICLE BRAKESGENERAL CHARACTERISTIC AND TEST PROCEDURE
SAE J 1694-1994 REMANUFACTURED HYDRAULIC MASTER CYLINDER FOR MOTOR VEHICLE BRAKES PERFORMANCE REQUIREMENTS
SAE J 1696-1997 STANDARD FUEL FILTER TEST FLUID
SAE J 1697-2003 RECOMMENDED PRACTICES FOR DESIGN AND EVALUATION OF PASSENGER AND LIGHT TRUCK COOLANT HOSE CLAMPED JOINTS
SAE J 1698-2003 (R) VEHICLE EVENT DATA INTERFACE - VEHICULAR OUTPUT DATA DEFINITION
SAE J 1699-1-2001 SAE J1850 VERIFICATION TEST PROCEDURES
SAE J 1699-2-1998 OBD-II RELATED SAE SPECIFICATION VERIFICATION TEST PROCEDURES
SAE J 17-2003 发泡橡胶
SAE J 1700-1994 SOFTENING POINT OF INTERIOR TRIM ADHESIVES
SAE J 1701-1999 TORQUE-TENSION TIGHTENING FOR INCH SERIES FASTENERS
SAE J 1701M-1996 TORQUE-TENSION TIGHTENING FOR METRIC SERIES FASTENERS
SAE J 1702-2002 SELF-PROPELLED SWEEPERS SWEEP-ABILITY PERFORMANCE
SAE J 1703-2003 机动车辆制动液
SAE J 1704-2003 BORATE ESTER BASED BRAKE FLUIDS
SAE J 1705-1995 低耐水性的制动液
SAE J 1706-1995 SAE J1703机动车辆制动液的生产、处理和配制
SAE J 1707-2002 机动车辆制动系统中的SAE J1703制动液的服务性维护
SAE J 1708-1993 重型车辆应用中的微机系统之间的串行数据通讯
SAE J 1709-1999 EUROPEAN BRAKE FLUID TECHNOLOGY
SAE J 1711-1999 RECOMMENDED PRACTICE FOR MEASURING THE EXHAUST EMISSIONS AND FUEL ECONOMY OF HYBRID-ELECTRIC VEHICLES
SAE J 1713-1998 STRUCTURAL TESTING OF PASSENGER CAR AND TRUCK DISC BRAKES
SAE J 1715-2000 ELECTRIC VEHICLE TERMINOLOGY
SAE J 1717-1994 INTERIOR AUTOMOTIVE PLASTIC PART TESTING
SAE J 1718-1997 MEASUREMENT OF HYDROGEN GAS EMISSION FROM BATTERY-POWERED PASSENGER CARS AND LIGHT TRUCKS DURING BATTERY CHARGING
SAE J 1723-1995 SUPERCHARGER TESTING STANDARD
SAE J 1725-1999 STRUCTURAL MODIFICATION FOR PERSONALLY LICENSED VEHICLES TO MEET THE TRANSPORTATION NEEDS OF PERSONS WITH DISABILITIES
SAE J 1726-2000 AIR-TO-AIR CHARGE AIR COOLER (CAC) INTERNAL CLEANLINESS
SAE J 1727-1996 INJURY CALCULATIONS GUIDELINES
SAE J 1729-2001 (R) PARKING BRAKE DRAWBAR PULL TEST PROCEDURE - COMMERCIAL VEHICLE
SAE J 1730-1999 ABS EXCITOR RING LOCATION STANDARDIZATION
SAE J 1731-2001 PILOT BEARINGS FOR TRUCK AND BUS
SAE J 1732-1998 HFC-134A(R134A) EXTRACTION EQUIPMENT FOR MOBILE AUTOMOTIVE AIR CONDITIONING SYSTEMS
SAE J 1733-1994 SIGN CONVENTION FOR VEHICLE CRASH TESTING
SAE J 1735-1995 HARMONIZED VEHICLE HEADLAMP PERFORMANCE REQUIREMENTS
SAE J 1737-1997 TEST PROCEDURES TO DETERMINE THE HYDROCARBON LOSSES FROM FUEL TUBES. HOSES. FITTINGS. AND FUEL LINE ASSEMBLIES BY RECIRCULATION
SAE J 174-1998 TORQUE-TENSION TEST PROCEDURE FOR STEEL THREADED FASTENERS INCH SERIES
SAE J 1741-1999 DISCRIMINATING BACK-UP ALARM SYSTEM STANDARD
SAE J 1742-1998 (R) CONNECTIONS FOR HIGH VOLTAGE ON-BOARD ROAD VEHICLE ELECTRICAL WIRING HARNESSES TEST METHODS AND GENERAL PERFORMANCE REQUIREMENTS
SAE J 1744-1994 280 RELAY FOOTPRINT
SAE J 1746-1999 ISP - VEHICLE LOCATION REFERENCING STANDARD
SAE J 1747-1994 RECOMMENDED METHODS FOR CONDUCTING CORROSION TESTS IN GASOLINE METHANOL FUEL MIXTURES
SAE J 1748-1998 METHODS FOR DETERMINING PHYSICAL PROPERTIES OF POLYMERIC MATERIALSEXPOSED TO GASOLINEOXYGENATE FUEL MIXTURES
SAE J 174M-1998 TORQUE-TENSION TEST PROCEDURE FOR STEEL THREADED FASTENERS METRIC SERIES
SAE J 175-2003 道路车辆轮子冲击试验程序
SAE J 1750-1995 DESCRIBING AND EVALUATING THE TRUCK DRIVER'S VIEWING ENVIRONMENT
SAE J 1751-1995 LUBRICATION COMPONENTS AND SYSTEMS USED ON MACHINE TOOL AND EQUIPMENT FOR THE AUTOMOTIVE INDUSTRY
SAE J 1752-1-1997 ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURES FOR INTEGRATED CIRCUITS - INTEGRATED CIRCUIT EMC MEASURMENT
SAE J 1752-2-2003 (R) MEASUREMENT OF RADIATED EMISSIONS FROM INTEGRATED CIRCUITS - SURFACE SCAN METHOD (LOOP PROBE METHOD) 10 MHZ TO 3 GHZ
SAE J 1752-3-2003 (R) MEASUREMENT OF RADIATED EMISSIONS FROM INTEGRATED CIRCUITS - TEMWIDEBAND TEM (GTEM) CELL METHOD; TEM CELL (150 KHZ TO 1 GHZ). WIDEBAND TEM CELL (150 KHZ TO 8GHZ)
SAE J 1754-1-2001 (R) HOSE ASSEMBLIES. RUBBER. HYDRAULIC. STEEL WIRE REINFORCED - PART 1 PROCUREMENT DOCUMENT
SAE J 1754-2-2001 HOSE ASSEMBLIES. RUBBER. HYDRAULIC. STEEL WIRE REINFORCED - PART 2 ORDERING INFORMATION
SAE J 1755-1995 GUIDELINES FOR USAGE OF STAINLESS STEEL AND BIMETAL FOR EXTERIOR AUTOMOTIVE BRIGHT TRIM
SAE J 1756-1994 TEST PROCEDURE TO DETERMINE THE FOGGING CHARACTERISTICS OF INTERIOR AUTOMOTIVE MATERIALS
SAE J 1757-1-2002 STANDARD METROLOGY FOR VEHICULAR DISPLAYS
SAE J 1759-2000 SAE HOSE MEASUREMENT STUDY
SAE J 176-1994 越野工作机械的快速注油
SAE J 1760-2001 DATA SECURITY SERVICES
SAE J 1765-1995 SAE MINIATURE BULB VIBRATION TEST
SAE J 1766-1998 (R) RECOMMENDED PRACTICE FOR ELECTRIC AND HYBRID ELECTRIC VEHICLE BATTERY SYSTEMS CRASH INTEGRITY TESTING
SAE J 1767-1995 INSTRUMENTAL COLOR DIFFERENCE MEASUREMENTS FOR COLORFASTNESS OF AUTOMOTIVE INTERIOR TRIM MATERIALS
SAE J 1770-1995 AUTOMOTIVE REFRIGERANT RECOVERYRECYCLING EQUIPMENT INTENDED FOR USE WITH BOTH R12 AND R134A
SAE J 1771-1998 CRITERIA FOR REFRIGERANT IDENTIFICATION EQUIPMENT FOR USE WITH MOBILE AIR-CONDITIONING SYSTEMS
SAE J 1772-2001 (R) SAE ELECTRIC VEHICLE CONDUCTIVE CHARGE COUPLER
SAE J 1773-1999 ELECTRIC VEHICLE INDUCTIVE CHARGE COUPLING RECOMMMENDED PRACTICE
SAE J 1775HIR 1559-1991 BLEED-AIR PNEUMATIC SYSTEMS FOR GAS TURBINE EQUIPPED MARINE AND AMPHIBIOUS CRAFT
SAE J 1776HIR 1514-1989 DESIGN AND SPECIFICATION GUIDE FOR HYDRAULIC PUMPS USED ON ADVANCED SURFACE CRAFT AND SUBMERSIBLE VEHICLES
SAE J 1777HIR 1063-1990 GENERAL ENVIRONMENTAL CONSIDERATIONS FOR MARINE VEHICLES
SAE J 1778-1998 (R) SHIP SYSTEMS AND EQUIPMENT - RECOMMENDED PRACTICE FOR HYDRAULIC FLUID SELECTION
SAE J 1779-2003 (R) SHIP SYSTEMS AND EQUIPMENT – HYDRAULIC SYSTEM DESIGN RITERIA FOR MARINE VEHICLES
SAE J 1780HRP 4382-1991 HYDRAULIC SYSTEM DIAGRAMS AND ASSOCIATED TABLES FOR MARINE VEHICLE
SAE J 1781HIR 1694-1987 MATERIALS FOR FLUID SYSTEMS OF MARINE VEHICLES
SAE J 1782-2000 (R) SHIP SYSTEMS AND EQUIPMENT - HYDRAULIC SYSTEMS - NOISE CONTROL
SAE J 1783-2002 (R) SHIP SYSTEMS AND EQUIPMENT - SELECTION OF HYDRAULIC DIRECTIONAL CONTROL VALVES
SAE J 1787-2000 MEASUREMENT OF THE TOTAL ASH CONTENT OF AVIATION PISTON ENGINE OILS BY A CALCULATION METHOD
SAE J 1789-2002 SELF-PROPELLED SWEEPERS AND SCRUBBERS BRAKING PERFORMANCE
SAE J 179-2001盘式车轮和可卸式轮圈的标签
SAE J 1790-2003 SELF-PROPELLED SWEEPERS AND SCRUBBERS STEERING REQUIREMENTS SINGLE-CIRCUIT HYDRAULIC SERVO-ASSISTED SYSTEMS
SAE J 1791-2002 SELF-PROPELLED SWEEPERS AND SCRUBBERS DUAL POSITION DRIVING CONTROLS AND DISPLAYS
SAE J 1792-1-2002 SELF-PROPELLED SWEEPERS - AIR FLOW PERFORMANCE PART 1 SUCTION AIR VOLUME PERFORMANCE
SAE J 1792-2-2002 SELF PROPELLED SWEEPERS - AIR FLOW PERFORMANCE PART 2 SUCTIONBLOWER FAN PERFORMANCE
SAE J 1793-1999 SELF-PROPELLED SWEEPERS AND SCRUBBERS TANK AND HOPPER CAPACITY RATING
SAE J 1794-1996 SAE RESTRAINT SYSTEMS EFFLUENT TEST PROCEDURE
SAE J 1796-1995 SPECTRAL TRANSMISSION TEST
SAE J 1797-1997 RECOMMENDED PRACTICES FOR PACKING OF ELECTRIC VEHICLES - BATTERY MODULES
SAE J 1798-1997 RECOMMENDED PRACTICE FOR PERFORMANCE RATING OF ELECTRIC VEHICLE BATTERY MODULES
SAE J 18-2002 海绵和膨体的多孔橡胶产品
SAE J 180-2002 建筑和工业用机械的充电系统
SAE J 1800-1987 METHOD FOR EVALUATING THE PAINTABLE CHARACTERISTIC
SAE J 1801-2000 制动区的制动效果记号
SAE J 1802-1-2003 TEST COMPONENT SPECIFICATIONS
SAE J 1802-2001 BRAKE BLOCK EFFECTIVENESS RATING
SAE J 1803-1997 SEAT BELT RESTRAINT SYSTEMS HARDWARE-GLOSSARY OF TERMS
SAE J 1804-1989 车顶用防腐蚀化合物
SAE J 1805-2003 SOUND POWER LEVEL MEASUREMENTS OF WORK MACHINES - STATIC AND IN-PLACE DYNAMIC METHODS
SAE J 1806-1999 卡车和大轿车用离合器尺寸
SAE J 1807-2000 HYDRAULIC POWER ASSIST BRAKE BOOSTER TEST PROCEDURE
SAE J 1808-1989 真空动力辅助制动助力器的测试程序
SAE J 1810-2002 (R) ELECTRICAL INDICATING SYSTEM SPECIFICATION
SAE J 1811-2002 POWER CABLE TERMINALS
SAE J 1812-2003 FUNCTION PERFORMANCE STATUS CLASSIFICATION FOR EMC IMMUNITY TESTING
SAE J 1814-2003 OPERATOR CONTROLS - OFF-ROAD MACHINES
SAE J 1817-2001 空气制动长冲程传动装置的标志
SAE J 1819-1999 机动车辆后座的儿童安全带装置
SAE J 182-1997 机动车辆的坐标点和三维基准系统
SAE J 1824-1998 夹钳运木集材机规范和术语定义
SAE J 1825-1998 SHELF STORAGE OF HYDRAULIC BRAKE COMPONENTS
SAE J 1826-1995 涡轮增压器的煤气台架试验规范
SAE J 1828-1996 UNIFORM REFERENCE AND DIMENSIONAL GUIDELINES FOR
SAE J 1829-2002 汽车燃料的空气燃料理想配比
SAE J 183-2002  发动机用润滑油的性能和发动机的使用
SAE J 1830-1987 喷丸用陶瓷丸的大小分类和特性
SAE J 1832-2001 汽油喷油嘴
SAE J 1834-2000 座位安全带的舒适、配合和方便
SAE J 1835-1999 可卸轮辋轮子的金属紧固件
SAE J 1836-1988 汽车玻璃密封材料粘接用密封胶搭接剪切试验
SAE J 1837-1991 外装饰的锌基外加铬层的电镀要求
SAE J 1839-1997 燃料中水的滴定试验方法
SAE J 184-1998 声音数据获得系统的考评
SAE J 1842-1994 (R) DISC WHEEL HUBSPOKE WHEEL AND AXLE INTERFACE DIMENSIONS— - COMMERCIAL VEHICLES
SAE J 1843-1993 中型和重型柴油公路车辆的与电子控制一起使用的加速器踏板位置传感器
SAE J 1846-2003 摩托车侧支架回位性能测试的测试面的描述
SAE J 1847-1989 车辆外部图文和销钉条纹耐磨蚀测试
SAE J 1849-2002 救护车报警器
SAE J 185-2003 ACCESS SYSTEMS FOR OFF-ROAD MACHINES
SAE J 1850-2001 CLASS B DATA COMMUNICATIONS NETWORK INTERFACE
SAE J 1851-1987 金属用粘胶剂的感应处理测试
SAE J 1853-2000 挂车装运的船用手绞车
SAE J 1854-2003 商用车辆制动力分布性能导则
SAE J 1855-2001 (R) DEPLOYMENT OF ELECTRICALLY ACTIVATED AUTOMOTIVE AIR BAGS FOR AUTOMOBILE RECLAMATION
SAE J 1857-2003 卡车和大轿车用飞轮尺寸
SAE J 1859-2003 测定空气制动阀进气-排气特性的测试程序
SAE J 1860-2003 空气制动阀进气-排气性能标签
SAE J 1861-2001 AIR BRAKE VALVE INPUT-OUTPUT CHARACTERISTIC REQUIREMENTS
SAE J 1862-2000 FUEL INJECTION SYSTEM FUEL PRESSURE REGULATOR AND PRESSURE DAMPER
SAE J 1863-1993 客运汽车的接缝损坏测试
SAE J 1864-1996 静态加压条件下汽车封胶的材料剥落性评价方法
SAE J 1865-1999 DIMENSIONAL COMPATIBILITY FOR COMMERCIAL VEHICLES FITMENT OF COMPLETE WHEELS
SAE J 1868-1993 优选合金钢的有限淬硬范围
SAE J 187-1970 TRUCK VEHICLE IDENTIFICATION NUMBERS
SAE J 1873-2003 液压制动软管组件的湿传导测试程序
SAE J 1875-2001 MATERIALS FOR PLASTIC CHECK VALVES FOR VACUUM BOOSTER SYSTEMS
SAE J 1876-2001 液压盘式制动装置的塑料防尘罩
SAE J 1877-1994 给车辆打条形码识别标签的推荐规范
SAE J 1879-1988 汽车用集成电路的通用技术要求和生产验收准则
SAE J 188-2003 高容量膨胀型动力转向式压力软管
SAE J 1883-1994 ELASTOMERIC BUSHING TRAC APPLICATION CODE
SAE J 1884-1996 VEHICLE JACK REQUIREMENTS AND TEST PROCEDURE
SAE J 1885-1992 ACCELERATED EXPOSURE OF AUTOMOTIVE INTERIOR TRIM COMPONENTS USING A CONTROLLED IRRADIANCE WATER COOLED XENON-ARC APPARATUS
SAE J 1887-2002 AUTOMOTIVE COMPACTED GRAPHITE IRON CASTINGS
SAE J 1888-1990 HIGH CURRENT TIME LAG ELECTRIC FUSES
SAE J 1889-1999 L.E.D. SIGNAL AND MARKING LIGHTING DEVICES
SAE J 189-2003 低压动力转向式回流软管
SAE J 1890-2000 PERFORMANCE ASSURANCE OF REMANUFACTURED. HYDRAULICALLY-OPERATED RACK AND PINION STEERING GEARS
SAE J 1892-1998 RECOMMENDED PRACTICE FOR BAR-CODED VEHICLE EMISSION CONFIGURATION LABEL
SAE J 1899-2000 LUBRICATING OIL. AIRCRAFT PISTON ENGINE (ASHLESS DISPERSANT)
SAE J 19-1997 LATEX-DIPPED GOODS AND COATINGS FOR AUTOMOTIVE APPLICATIONS
SAE J 190-1998 POWER STEERING PRESSURE HOSE-WIRE BRAID
SAE J 1903-1997 AUTOMOTIVE ADAPTIVE DRIVER CONTROLS. MANUAL
SAE J 1907-1988 用于汽车玻璃密封的玻璃和弹性材料的抗剥离粘性测试
SAE J 1908-2002 电气设备接地规范
SAE J 191-2003 低容量膨胀型动力转向式压力软管
SAE J 1911-2003 公路车辆气囊容量的测试程序
SAE J 1915-2000 RECOMMENDED REMANUFACTURING PROCEDURES FOR MANUAL TRANSMISSION CLUTCH ASSEMBLIES
SAE J 1916-1989 发动机水泵修复程序和验收准则
SAE J 1918-2002 METHOD FOR THE DETERMINATION OF EXPANSION AND WATER ABSORPTION OF AUTOMOTIVE SEALERS
SAE J 192-2003 雪地汽车的外部声级
SAE J 1922-2000 用于中型和重型公路车辆的电子控制的传动系统控制接口
SAE J 1926-1-1993 CONNECTIONS FOR GENERAL USE AND FLUIDE POWER-PORTS AND STUD ENDS WITH ISO 725 THREADS AND O-RING SEALING - PART 1 THREADED PORT WITH O-RING SEAL IN TRUNCATED HOUSING
SAE J 1926-2-1995 CONNECTIONS FOR GENERAL USE AND FLUID POWER PORTS AND STUD ENDS WITH ISO 725 THREADS AND O-RING SEALING - PART 2 HEAVY-DUTY (S SERIES) STUD ENDS
SAE J 1926-3-1993 CONNECTIONS FOR GENERAL USE AND FLUID POWER PORTS AND STUD ENDS WITH ISO 725 THREADS AND O-RING SEALING - PART 3 LIGHT-DUTY (L SERIES) STUD ENDS
SAE J 1927-2001 CUMULATIVE DAMAGE ANALYSIS FOR HYDRAULIC HOSE ASSEMBLIES
SAE J 1928-1993 DEVICES PROVIDING BACKFIRE FLAME CONTROL FOR GASOLINE ENGINES IN MARINE APPLICATIONS
SAE J 193-1996 球形螺柱和套筒组件的测试规程
SAE J 1930-2002 ELECTRICALELECTRONIC SYSTEMS DIAGNOSTIC TERMS. DEFINITIONS. ABBREVIATIONS. AND ACRONYMS - EQUIVALENT TO ISOTR 15031-2APRIL 30. 2002
SAE J 1938-1998 DESIGNPROCESS CHECKLIST FOR VEHICLE ELECTRONIC SYSTEMS
SAE J 1939-15-2003 REDUCED PHYSICAL LAYER. 250K BITSSEC. UN-SHIELDED TWISTED PAIR (UTP)
SAE J 1940-2002 小型发动机评定程序
SAE J 1941-1990 COOLANT CONCENTRATE (LOW SILICATE. ETHYLENE GLYCOL TYPE REQUIRING AN INITIAL CHARGE OF SUPPLEMENTAL COOLANT ADDITIVE) FOR HEAVY-DUTYENGINES
SAE J 1942-1-2003 QUALIFIED HOSES FOR MARINE APPLICATIONS
SAE J 1942-2002 船用软管和软管组件
SAE J 1944-2000 1 RUCK & BUS MULTIPURPOSE VEHICLE WINDSHIELD WASHER SYSTEM
SAE J 1945-2000 T型十字齿法兰
SAE J 1946-2001 COMPANION FLANGES. TYPE A (EXTERNAL PILOT) AND TYPE S (INTERNAL PILOT)
SAE J 1948-2003 司机室睡客限制系统测试
SAE J 1949-1988 道路车辆高压喷油管端60度内锥螺纹的连接件
SAE J 195-1988 机动车辆的速度控制.汽车
SAE J 1950-1989 PROVING GROUND VEHICLE CORROSION TESTING
SAE J 1952-2003 全轮传动系统的分类
SAE J 1953-2001 BRAKE-STROKE INDICATOR DESIGN GUIDELINE FOR CAM OR DISC AIR-BRAKE ACTUATORS
SAE J 1957-2000 CENTER HIGH MOUNTED STOP LAMP STANDARD FOR VEHICLES LESS THAN 2032 MM OVERALL WIDTH
SAE J 1958-2002 柴油发动机高压喷油钢管
SAE J 1959-2003 车身底板用的防腐蚀化合物
SAE J 1960-2003 用控制水冷氙弧灯对汽车外部材料的加速辐照
SAE J 1961-1988 用太阳光菲涅耳反射装置对汽车外部材料的加速辐照
SAE J 1962-2002 (R) DIAGNOSTIC CONNECTOR EQUIVALENT TO ISODIS 15031-3DECEMBER 14. 2001
SAE J 1965-2003 ROAD VEHICLES - WHEELS FOR COMMERCIAL VEHICLES AND MULTIPURPOSE PASSENGER VEHICLES - FIXING NUTS - TEST METHODS
SAE J 1966-2000 飞机活塞发动机润滑油(非分散的矿物油)
SAE J 1967-2000 用于车辆醒目的反光材料
SAE J 1969-1988 汽车密封件的电镀兼容性
SAE J 1970-2003 SHORELINE SOUND LEVEL MEASUREMENT PROCEDURE FOR RECREATIONAL MOTORBOATS
SAE J 1973-1991 私人船舶的漂浮性
SAE J 1974-1993 DECORATIVE ANODIZING SPECIFICATION FOR AUTOMOTIVE APPLICATIONS
SAE J 1975-1997 碳素钢铸件的淬硬性
SAE J 1976-2002 OUTDOOR WEATHERING OF EXTERIOR METERIALS
SAE J 1977-1997 BRAKING PERFORMANCE - RUBBER-TIRED. SELF-PROPELLED CRANES
SAE J 1978-2002 OBD II SCAN TOOL - EQUIVALENT TO ISODIS 15031-4DECEMBER 14. 2001
SAE J 1979-2002 EE DIAGNOSTIC TEST MODES - EQUIVALENT TO ISODIS 15031-5 APRIL 30.2002
SAE J 198-2003 卡车、大轿车和各种用途车辆的风挡刮水器系统
SAE J 1980-2001 汽车非正常位置时使用置放气袋法评价乘客相互作用的导则
SAE J 1981-2002 ROAD HAZARD IMPACT TEST FOR WHEEL AND TIRE ASSEMBLIES (PASSENGER CAR. LIGHT TRUCK. AND MULTIPURPOSE VEHICLES)
SAE J 1982-1998 NOMENCLATURE-WHEELS FOR PASSENGER CARS. LIGHT TRUCKS. AND MULTIPURPOSE VEHICLES
SAE J 1984-1989 28型(9.5mm)柴油喷油嘴组件
SAE J 1985-1993 FUEL FILTERS-INITIAL SINGLE-PASS EFFICIENCY TEST METHOD
SAE J 1986-1993 轮辋辋圈的重量平衡的设备规范,测试过程和推荐性能
SAE J 1987-1998 FORCE AND MOVEMENT TEST METHOD
SAE J 1988-1994 RESIDUAL ALIGNING MOMENT TEST
SAE J 1989-1998 RECOMMENDED SERVICE PROCEDURE FOR THE CONTAINMENT OF R-12
SAE J 1990-1999 EXTRACTION AND RECYCLE EQUIPMENT FOR MOBILE AUTOMOTIVE AIR-CONDITIONING SYSTEMS
SAE J 1991-1999 STANDARD OF PURIFY FOR USE IN MOBILE AIR-CONDITIONING SYSTEMS
SAE J 1992-2001 WHEELSRIMS MILITARY-VEHICLES-TEST PROCEDURES AND PERFORMANCE REQUIREMENTS
SAE J 1993-1996 HIGH-CARBON CAST-STEEL GRIT
SAE J 1994-1995 LABORATORY TESTING OF VEHICLE AND INDUSTRIAL HEAT EXCHANGERS FOR HEAT TRANSFER PERFORMANCE
SAE J 1995-1990 发动机功率测试规范.火花点火式和压燃式.总功率评定
SAE J 1996-1998 内燃机-活塞圈,质量要求
SAE J 1997-1998 内燃机活塞环.方截面环
SAE J 1998-1992 内燃机活塞环.方截面窄环
SAE J 1999-1998 内燃机活塞环.刮油环
SAE J 20-1-2002 COOLANT HOSE (SUPPLEMENT TO SAE J20 FOR GOVERNMENT USE REPLACING PART OF MS52130)
SAE J 20-2-2001 COOLANT HOSE - NORMAL SERVICE TYPE CONVOLUTED. WIRE SUPPORT HOSE (SUPPLEMENT TO SAE J20 FOR GOVERNMENT USE REPLACING PART OF MS51008)
SAE J 20-2002 冷却剂系统软管
SAE J 200-2003 橡胶材料的分类系统
SAE J 2000-1998 内燃机活塞环.梯形截面环
SAE J 2001-1998 内燃机活塞环.半梯形截面环
SAE J 2002-1998 内燃机活塞环.控油环
SAE J 2003-1998 内燃机活塞环.装置螺旋弹簧的控油环
SAE J 2004-1998 内燃机活塞环.膨胀多段合成控油环
SAE J 2005-1991 游艇的固定声源的水平测试过程
SAE J 2006-2003 MARINE EXHAUST HOSE
SAE J 2009-1995 预先卸除舞台照明系统
SAE J 201-1997 轿车和轻型卡车运行期间的制动性能测试规程
SAE J 2012-2002 (R) DIAGNOSTIC TROUBLE CODE DEFINITIONS EQUIVALENT TO ISODIS 15031-6APRIL 30. 2002
SAE J 2013-1991 军用轮胎词汇
SAE J 2014-2001 军用作战用轮式车辆的充气轮胎
SAE J 2016-1999 聚合物的耐化学应力性
SAE J 2017-1995 开发技术人员的培训
SAE J 2018-1989 评估技术人员的培训
SAE J 2019-1994 ACCELERATED EXPOSURE OF AUTOMOTIVE EXTERIOR MATERIALS USING A CONTROLLED IRRADIANCE AIR-COOLED XENON-ACR APPARATUS
SAE J 2020-2003 用荧光紫外线和冷凝设备对汽车外部材料的加速辐照
SAE J 2022-2000 水平挖穴机的分类、命名和规范定义
SAE J 2024-2001 CONTAMINANTS FOR TESTING AIR BRAKE COMPONENTS AND AUXILIARY PNEUMATIC DEVICES
SAE J 2025-1989 可泵送密封胶流动性的评价方法
SAE J 2027-1998 PRELIMINARY STANDARD FOR PROTECTION COVERS FOR GASOLINE FUEL LINE TUBING
SAE J 2028-2000 FRONT-WHEEL-DRIVE CONSTANT VELOCITY JOINT BOOT SEALS
SAE J 2030-2002 (R) HEAVY-DUTY ELECTRICAL CONNECTOR PERFORMANCE STANDARD
SAE J 2031-2001 高电压点火电缆
SAE J 2032-2000 IGNITION CABLE ASSEMBLIES
SAE J 2034-1993 个人水运工具-通风系统
SAE J 2039-2001 SIDE TURN SIGNAL LAMPS FOR LONG VEHICLES
SAE J 2040-2002 总宽度2032mm以上的车辆用尾灯
SAE J 2041-1999 REFLEX REFLECTORS FOR USE ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH
SAE J 2042-2003 总宽度2032mm以上的机动车辆用间距、侧面标志和识别用灯
SAE J 2044-2002 QUICK CONNECTOR COUPLING SPECIFICATION FOR LIQUID FUEL AND VAPOREMISSIONS SYSTEMS
SAE J 2045-1998 管软管的组配
SAE J 2046-1993 个人水运工具-燃料系统
SAE J 2047-1998 TIRE PERFORMANCE TECHNOLOGY
SAE J 2050-2001 高温下动力操作压力软管
SAE J 2051-1992 QUALIFICATIONS FOR FOUR-WAY SUBBASE MOUNTED AIR VALVES FOR AUTOMOTIVE MANUFACTURING APPLICATIONS
SAE J 2052-1997 TEST DEVICE HEAD CONTACT DURATION ANALYSIS
SAE J 2053-1994 BRALE MASTER CYLINDER PLASTIC RESERVOIR ASSEMBLY FOR ROAD VEHICLES
SAE J 2055-1996 关节式吊杆原木装载机的识别术语和零件命名
SAE J 2056-3-2000 传输介质选择
SAE J 2057-1-1997 A级应用定义
SAE J 2057-2-2001 CLASS A MULTIPLEXING ACTUATORS
SAE J 2057-3-2001 CLASS A MULTIPLEXING SENSORS
SAE J 2057-4-2001 CLASS A MULTIPLEXING ARCHITECTURE STRATEGIES
SAE J 2059-1992 ALL-WHEEL-DRIVE DRIVETRAIN SCHEMATIC SYMBOL STANDARD
SAE J 2064-1999 汽车用R134a空气制冷调节软管
SAE J 2066-1994 FILTER AND FILTER ELEMENT FOR HYDRAULIC SYSTEM(S) USED ON MANUFACTURING AND ASSEMBLY EQUIPMENT
SAE J 2069-2001 客车,货车和轻型卡车用恢复联接转辙器
SAE J 207-1985 ELECTROPLATING OF NICKEL & CHROMIUM ON METAL PARTS
SAE J 2071-1994 AERODYNAMIC TESTING OF ROAD VEHICLES-OPEN THROAT WIND TUNNEL ADJUSTMENT
SAE J 2073-1998 汽车起动器再生程序
SAE J 2074-2000 THE AIR BAG SYSTEMS IN YOUR CAR WHAT THE PUBLIC NEEDS TO KNOW
SAE J 2075-2001 ALTERNATOR REMANUFACTURINGREBUILDING PROCEDURES INCLUDES PASSENGER CAR. HEAVY DUTY. INDUSTRIAL. AGRICULTURAL. AND MARINE
SAE J 2076-2001 高温动力转向软管.低压
SAE J 2077-1990 微型片电熔断器
SAE J 2079-1992 LOCATION OF ATOMIZER OF ETHER SYSTEM FOR DIESEL ENGINES
SAE J 2081-1997 测定一面是塑料的安全玻璃材料抗仿真风化的测试程序
SAE J 2082-1992 COOLING FLOW MEASUREMENT TECHNIQUES
SAE J 2084-1993 AERODYNAMIC TESTING OF ROAD VEHICLES - TESTING METHODS AND PROCEDURES
SAE J 2087-1997 (R) DAYTIME RUNNING LIGHT
SAE J 2092-1999 TESTING OF WHEELCHAIR LIFTS FOR ENTRY TO OR EXIT FROM A PERSONALLY LICENSED VEHICLE
SAE J 2093-1999 DESIGN CONSIDERATIONS FOR WHEELCHAIR LIFTS FOR ENTRY TO OR EXIT FROM A PERSONALLY LICENSED VEHICLE
SAE J 2094-2001 术语
SAE J 2099-1999 STANDARD OF PURITY FOR RECYCLED HFC-134A FOR USE IN MOBILE AIR- CONDITIONING SYSTEMS
SAE J 2100-1992 汽车粘合组件环境老化试验
SAE J 2101-91 声学.户外用施工机械辐射噪声的测量.测定符合外部噪声限定值的方法
SAE J 2102-91 声学.户外用土方机械辐射噪声的测量.测定符合外部噪声限定值的方法.静态测试条件
SAE J 2104-91 声学.户外用土方机械辐射噪声的测量.动态测试条件
SAE J 2105-91 声学.户外用土方机械驾驶员位置辐射噪声的测量.模拟工作环境测试条件
SAE J 2108-1991 踏板门开关
SAE J 211-1-2003 (R) INSTRUMENTATION FOR IMPACT TEST-PART 1-ELECTRONIC INSTRUMENTATION
SAE J 211-2-2001 INSTRUMENTATION FOR IMPACT TEST - PART 2. PHOTOGRAPHIC INSTRUMENTATION
SAE J 2111-1998 HEADLAMP CLEANERS

查询进一步信息，请访问官方网站查询进一步信息，请访问官方网站http://www.sae.org/technical/standards/。